Terma KTX3 White 300W Thermostatic Electric Heating Element

White Thermostatic Controller with 300W Heating Element by Terma

This electric element from Terma is suitable for use as a heat source in electric towel rails, electric radiators and dual fuel towel rails. Requires electrical connection by an approved electrician.

Electric Element Features

• Finish: White
• Type: Thermostatic Electric Element
• Output: 300 Watts
• Tapping Size: 1/2"
• Voltage: 230v/50Hz
• IP Rating:IPx5 (safe for use in bathroom)

Electric Element Sizes

• Internal probe length: 310mm

Additional Information

• 30 heat settings from 30°C to 60°C in steps of 1°C - regulates the internal temp and displays this on screen
• Daily 24 hr timer - 0.5 to 4 hrs drying function
• 4 x buttons for dryer, power and temp +/-
• Supplied with a 2 year manufacturer's guarantee

Wattage advice: to correctly choose the right wattage of element for your towel rail or radiator, you should look at the output of the chosen radiator as central heating (hydronic) in watts and choose an element with the wattage closest to that figure. If the output of the chosen radiator is only listed in BTUs, the conversion formula is BTUS / 3.41 = Watts.

Advice: When making the decision to electrify any towel rail or radiator it is important to check with the manufacturer of that model that it is suitable to work with a heating element. Not all towel rails or radiators are suitable dependant on their design and how the heat will cycle internally around the rail, so avoid electrifying certain models as they won't work and this will not be the fault of the element.

Downloads

• Terma KTX 3 Electric Element User Manual

Terma Video